This includes paper cutter, scissors, electric tape, paint, glue, quick glue, recovery wadding, shock chord, ruler, pencil & eraser, parachute lines, shock cord mount ,launch Lug, and stickers etc. Just select the Quantity you need.
This is a PVA bonded spiral paper tube, made from high BF sackcraft paper. This component becomes the outer body of the rocket. Please select the quantity you want of each size.
Size 1 - ID=20 mm
Size 2 - ID=25 mm
Size 3 - ID=30 mm
Size 4 - ID=35 mm
Size 5 - ID=40 mm
Size 6 - ID=45 mm
This is an injection stretch moulded nose cone, made from ABS. These are reusable parts. You can select the sizes you need based on the diameter of the body tubes selected. Please select number of each size needed.
These are made of balsa sheets. Any shape can be selected for any rocket. We have made these fins fairly large and the simpler shapes can be cut by students/builders themselves to suit the needs of their rocket.
Balsa(10cmX50cm)
Shape 1
Shape 2
Shape 3
Shape 4
Shape 5
Shape 6
Shape 7
Shape 8
Shape 9
Shape 10
This is a PVA bonded spiral paper tube, made from high BF sackcraft paper. This component becomes the housing for the fuel cartridge(Motor) of the rocket. Size should be selected on the basis of motor being used.
Size 1 - Class B Motor
Size 2 - Class C Motor
This is a sheet metal clip designed to hold the motor and the motor mount in place and tight inside the rocket. Select the quantity based on number of rockets you plan to build. this is a reusable part.
TYPE 1
These are rings that ensure that the propulsion system is aligned with the axis of the rocket. They are used based on the size of the outer body tube and the motor housing being used. We have various different sizes and types. Please Select the quantities based on your requirement.
Size 1 - OD=30 mm
Size 2 - OD=35 mm
Size 3 - OD=40 mm
Size 4 - OD=45 mm
Size 5 - OD=45 mm Multi motor design
Size 1 - ID=35 mm
Size 2 - ID=40 mm
Size 3 - ID=45 mm
This is a PVA bonded spiral paper frustum, made from high BF sackcraft paper. It can be used to increase or reduce the diameter of a rocket. There are two variants available. please select number of pieces for each type.
Tall adapter
Short adapter
These are parts made from balsa sheets designed to hold the adapters together with the body tubes.Select number of sets based on number of adapter you have ordered
Dia Reduction Clip
Dia Increase Clip
Balsa Discs - Assorted
These are balsa sheet components designed to hold any payloads(Electronics, optic or otherwise) in the rocket in place. Reducing vibration and keeping it safe. select quantities based on how many rockets you will build with payloads. Two size variants are available. They come in a set of four components to build one payload housing.
Size 1 - ID=40 mm
Size 2 - ID=45 mm
This is a balsa component designed to improve strength of the rocket structure while balancing the weight of a payload along the body. Buy 6 -7 pcs for every payload based rocket you will build.
Balsa Wall Lining - 15 cm
Balsa Wall lining - 20 Cm
The parachute is usually made of plastic sheets and the parachute lines are made of nylon ropes. Select quantity based on number of Parachutes needed.
50 gms Rocket
100 gms Rocket
250 gms Rocket
500 gms Rocket
The Launcher is a tripod like system with a launch rod designed to hold and launch model rockets in a safe manner. there are two variants available based on frequency of use and size of rockets.
The ignition System is made from 2 different components, Namely :
1) Connector Cable - Reusable power transmission cable with launch controller switch. Select quantity based on requirement with a few spares.
2) Power Source & Housing - A rechargeable battery setup with charger and customised outputs. There are two variants available based on number of rockets to be flown per full charge.
Heavy Duty SS Launcher
Portable Wooden launcher
Connector Cable
Heavy Duty Power Source & Housing
Portable Power Source & Housing
These are Black Powder Solid Fuel Cartridges, with high density solid fuel contained in phenolic resin bonded paper tubes made from high BF sackcraft paper, which is then coated with a PU varnish. Rocketeers right now provided 2 different variants. Each motor comes with its own Igniter Fuse Set
Class B
Class C
Top
